LM CPS-RPEN4 – PROTECTOR SYSTEM

*** Please note, price includes tariff charges ***

Monitored Reflective Photo Eye

• be sure to disconnect power to the operator BEFORE installing the photo eye
• the door MUST be in the fully opened or closed position before installing the photo eye
• set up the photo eye no higher than 6″ (15cm) above the floor and no farther than 6″ from the center plane of the door
• for installation ease, the photo eye and reflectors should be on the same horizontal plane
• make sure the photo eye is powered on properly
• adjust the photo eye and / or reflector until the alignment LED is off